High Performance Circular Rescue Saws

The Pro-Saw/Cut-Off rescue saw can cut virtually any material; brick, concrete, wood, steel, etc. The perfect fire rescue saw. Ergonomically designed to work in confined spaces. Lightweight and powerful for safe and easy operation. Built tough to meet rescue peronells' extreme demands.

Circular Rescue Saw Models

Model Number	HP	CC	RPM	Blade Size	Weight *	List Price
PS-COS12	5.6	74	10,500	12 inch	20.7 lbs.	$1,542.00
PS-COS14	5.6	74	10,500	14 inch	21.3 lbs.	$1,640.00

PS-COS1464	6.4	94	10,500	14 inch	29.1 lbs.	$1,994.00
PS-COS1664	6.4	94	10,500	16 inch	30.4 lbs.	$2,140.00

PS-COS1479	7.9	119	10,500	14 inch	29.1 lbs.	$2,231.00
PS-COS1679	7.9	119	10,500	16 inch	30.4 lbs.	$2,310.00

Extended Ventilation Rescue Chain Saw Specifications and Features

General Specifications	Power head dry weight must not exceed 21 lbs. Power head must run on 50:1 fuel oil mixture Saw must be single cylinder, 2 cycle with loop scavengine. Saw must include,: power head, tool kit, manual, 2 bottls of two cycle oil mix. Saw must have 180 day warranty
Powerhead Specifications:	Saw power head must have 4.4 cubic inch displacement with a 2.05-inch molybdenum impregnated bore and 1.34 inch stroke. Power head must develop 6 horsepower at 8500 RPM Power head shall idle at 2500 RPM and must obtain a maximum unloaded speed of 10,000 RPM. Centrifugal clutch must engage at 3500 RPM. Electronic Ignition must have lifetime warranty. Carburetor must be an all position diaphragm type with integral fuel pump. Carburetor must be fitted with a paper air filter. Air filtering system must include a covered 3-stage foam air pre filter to protect it from debris and water. Carburetor must be isolated from the cylinder by a fiberglass spacer, rubber boot and isolating wall to prevent vapor lock. Muffler must be side ported USFS and ANSI approved with spark arrestor. Crankshaft shall be balanced two (2)-piece drop forged. Crankshaft shall be supported by two (2) deep groove ball bearings. Piston shall be made from a low friction alloy. Rod shall have silver plated needle bearings. Cylinder shall have asymmetrical cooling fins and shall be cooled by a high capacity fan. Power head must be isolated from handle assembly by six (6) rubber "springs" to cancel vibration. Saw shall have full wrap handle for operator protection and safety. Saw shall have rear hand guard. Saw shall have large D-ring handle for easy starting with gloves. Saw must have positive position on/off switch for safety. (Momentary switch is not acceptable). Power head shall have large fill caps. Fuel tank volume shall be 1.58 pints.
Blade Specifications:	Saw must be able to accept abrasive, diamond, and carbide rescue blades Saw arbor must be interchangeable with 1-inch arbor blades Cutting arm must e reversible from inbourd to outboard side of powerhead

Cut-Off Rescue Circular Saw Features

Highest Power To Weight Ratio.
- There is more power in our smaller saws than many larger saws.
Air Injection Centrifugal Air Cleaning System
- Allows longer intervals between filter cleaning. Reduces wear and operates smoother.
Low Vibe System
- Seperates the handle from the engine, bar and chain. Effectively reduces tiring vibrations.

Smart Start Decompression.
- This valve reduces piston pression while starting. This features reduces required pulling force and makes starting easier
Molybdenum Impregnated Piston, Rings, and Cylinders.
- Molybdenum is a substance that is impregnated into some metals that aid in the lubrication of those metals by coming to the surface as they heat up and receding into the metal when they cool.

Advanced 3-Stage Air Filtration System
Inertia Activated Chain Break
Insulated Full Wrap Handle
Combined Choke and Throttle Lock
Automatic Adjustable Oiler

Rescue Circular Saw Blades

USAR Concrete and Metal Cutting Diamond Blade

The USAR concrete and metal cutting diamond blade is the diamond blade that rescue teams have been waiting for. It cuts through steel, concrete, and cast iron with incredible speed. Steel core design with special heat-reducing holes with no reduction of cutting depth. Wet or dry cutting. 12" and 14" blades available.

Item Number	Description	List Price
USAR-12	12" USAR Diamond Circular Saw Blade	$ 530.00
USAR-14	14" USAR Diamond Circular Saw Blade	$ 593.00

Premium Concrete Cutting Diamond Blade

Premium diamond concrete cutting diamond blade

The premium concrete cutting diamond blade reduces undue stress and retains the tension that can be lost stamping. Roller tension steel blanks virtually eliminates wobble and reduce chance of cracking. Blades run true. Used for cutting concrete.

Item Number	Description	List Price
GA-300-12	12" Premium Diamond Circular Saw Blade	$ 536.00
GA-300-14	14" Premium Diamond Circular Saw Blade	$ 593.00
GA-300-16	16" Premium Diamond Circular Saw Blade	$ 719.00

Uni-Cut Carbide Circular Saw Blade

The uni-cut circular saw blade is specially designed with segmented carbide that is primarily used for ventilation, forcible entry, rescue, and demolition crews. The unique design does not need sharpening - simply reverse the rotation of the blade and continue cutting.

Item Number	Description	List Price
UC-12	12" Uni-Cut Carbide Circular Saw Blade	$ 336.00
UC-14	14" Uni-Cut Carbide Circular Saw Blade	$ 357.00
UC-16	16" Uni-Cut Carbide Circular Saw Blade	$ 378.00

Multi-Purpose Carbide Circular Saw Blade

"The blade that does it all!"

The multi-purpose carbide saw blade is able to cut through the following.
Metal: medium steel, iron, tin, copper, brass, aluminum, angle iron, pipe, tubing, etc.
Wood: solid, veneer, plywood, nail embedded wood, etc.
Plastics: tubes, laminates, pipe, etc.

Item Number	Description	List Price
MPB-12	12" Multi-Purpose Carbide Rescue Circular Saw Blade	$ 221.00
MPB-14	14" Multi-Purpose Carbide Rescue Circular Saw Blade	$ 315.00

"The Rescue Blade" Carbide Circular Saw Blade

A Carbide chip blade designed for use in a multitude of different applications including roofing, drywall, plastics, sheet metal, tires, rail ties, and much more. Excellent for fire and rescue work.

Item Number	Description	List Price
12RB12	12" 12 Tooth "Rescue Blade" Carbide Circular Saw Blade	$ 94.00
12RB24	12" 24 Tooth "Rescue Blade" Carbide Circular Saw Blade	$ 100.00
14RB	14" 24 Tooth "Rescue Blade" Carbide Circular Saw Blade	$ 173.00

Composite Abrasive Masonry and Metal Cutting Blades

Made of the highest quality abrasive grain, fiberglass, resins, ets. Our composite blades are produced for the best mix of cutting speed and wear resistance.

The masonry blades are good for cutting concrete, asphalt, brick, stone, etc.

The metal cutting blade is good for cutting metal, aluminum, ductile iron, etc.

Item Number	Description	List Price
12MCB	12" Composite Abrasive Metal Cutting Blade	$ 21.00
14MCB	14" Composite Abrasive Metal Cutting Blade	$ 21.00
16MCB	16" Composite Abrasive Metal Cutting Blade	$ 37.00

12MCB	12" Composite Abrasive Masonry Cutting Blade	$ 21.00
14MCB	14" Composite Abrasive Masonry Cutting Blade	$ 21.00
16MCB	16" Composite Abrasive Masonry Cutting Blade	$ 37.00

Parts and Accessories

Item Number	Description	List Price
EP	Eye Protection	$ 9.00
HP	Hearing Protection	$ 37.00
STRAP	Carrying Strap	$ 68.00

C-26PAC/1	(1) 6-Pack of 2 Cycle Oil 2.6 oz. Bottles	$ 13.00
C-26PAC	(8) 6-Packs of Case of 2 Cycle Oil of 2.6 oz. Bottles	$ 95.00

SPARK	Spark Plug	$ 24.00

D-HNDL	D-Ring Handle, Black Molded	$ 24.00
D-HNDL-BILLET	D-Ring Handle, Billet Aluminum	$ 37.00

OWK	Optional Wet Kit (Standard Feature on 14" and 16" Saws)	$ 131.00

VSC-COS	Aluminum Diamond Plated Case	$ 635.00
COS-SAWKIT	Rescue Saw Kit Kit Includes 6 pack of 2 cycle oil, eye and hearing protection, tool kit, and aluminum diamond plated saw case	$ 804.00

Navigation

Superstore Navigation

World Headquarters

Unifire, Inc.
3924 East Trent Avenue
Spokane, WA 99202

1-800-745-3282
Fax: 509-535-9064

Email Link